9.Attach the Seat (12) to the Seat Frame (5) with four M6 x 63mm Button Screws (43) and four M6 Washers (44).
10.Insert a Pad Tube (10) into the Leg Lever (6). Slide two Foam Pads (14) onto the Pad Tube.
Assemble the other two Pad Tubes (10) to the Leg Lever (6) and the Seat Frame (5) in the same manner.
11.Attach a Weight Rest Pin (24) to the Left Weight Rest (42) with an M4 x 16mm
Slide the Left Weight Rest (42) onto the indicated Upright (4) and engage the Weight Rest Pin (24) into the Weight Rest and Upright.
Repeat this step with the Right Weight Rest
(9)and other Upright (4). Set both Weight Rests at the same height.
12.Attach the Curl Pad (13) to the Curl Post (7) with two M6 x 15mm Button Screws (40).
13.Make sure that all parts have been properly tight- ened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the next page.
9 |
|
| 12 |
|
|
| |
|
|
| 5 |
|
|
| 44 |
|
|
| 43 |
|
|
| 43 |
10 |
|
| 5 |
|
|
| 10 |
|
|
| 6 |
| 14 |
| 10 |
|
|
| |
|
|
| 14 |
|
|
| 10 |
11 |
|
|
|
|
|
| 24 |
|
| 4 | 42 |
|
|
| |
| 9 |
| 38 |
|
|
| |
|
|
| 4 |
12 |
|
|
|
|
| 13 |
|
|
|
| 7 |
|
|
| 40 |
8
