ATTACHING THE CURL POST OR LAT TOWER
For some exercises, the Curl Post (42) must be attached to the weight bench.
Insert the Curl Post (42) into the indicated hole in the Front Leg (19). Align the holes in the Front Leg and the Curl Post. Secure the Curl Post with the Adjustment Knob (36).
Make sure that you fully tighten the Adjustment Knob.
For other exercises, the Lat Tower (9) must be attached to the weight bench.
Insert the Lat Tower (9) into the indicated hole in the Front Leg (19). Align the holes in the Front Leg and the Lat Tower. Secure the Lat Tower with the Adjustment Knob (36). Make sure that you fully tighten the
Adjustment Knob.
When the Lat Tower or Curl Post are not in use, they can be stored in the vertical tube on the Left Stabilizer (25, see the inset drawing). However, for some exercises, you should store these parts away from the weight bench so they do not interfere with your exercise.
ADJUSTING THE PAD TUBE
The Pad Tube (38) that is inserted into the Front Leg (19) can be adjusted to either a high position or a low position.
To adjust the Pad Tube (38), remove one Foam Pad (10). Slide the Pad Tube out of the bracket on the Front Leg
(19)and
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (18), slide the desired amount of weight (not included) onto the Weight Tube (39).
WARNING: Do not place more than 130 pounds on the leg lever.
|
| 42 |
9 |
| 25 |
| 42 | 36 |
|
| |
Preacher | 19 |
|
|
| |
Curl Bar |
|
|
Rest |
|
|
19 |
38 |
10 |
18 |
39
14
