6.Attach the
7.The Console (6) requires four ÒAAÓ batteries (not included). Alkaline batteries are recommended.
To install batteries, look under the Console (6) and locate the two Battery Covers (66)Ñthere is one Battery Cover on each side. Remove the Battery Covers by sliding them in the direction shown by the arrows on the Battery Covers. Insert two batteries into each battery compartment; make sure that all four batteries are turned so the negative ends (marked ÒÐÓ) are touching the springs in the battery com- partments. Then, reattach the Battery Covers by slid- ing them in the opposite direction.
6
7
54
3 |
10
55
6
Batteries66
8.Make sure that all parts of the elliptical trainer are properly tightened. Place a mat under the elliptical trainer to protect the floor or carpet from damage.
8
