ProForm PFEL05807 Screws 95. Tip Start all screws before, Tightening any of them. Avoid pinching

7. Orient the Rear Frame Cover (23) as shown.	7
While a second person tips the elliptical exercis-
er forward, attach the Rear Frame Cover to the
Base (1) with four M4 x 65mm Screws (91) and
two M4 x 16mm Self-tapping Screws (79).	23
	79
	1
	91
8. Have a second person hold the Upright (6) near	8
the Frame (2) as shown.
Pull the Wire Harness (48) out of the Frame (2)	48
and insert it upward through the Upright (6).	6
Tip: Use a piece of tape or an elastic band to
hold the Wire Harness in place until step 14.
Insert the Upright (6) into the Frame (2). Attach	2
the Upright with three M8 x 16mm Patch	95
Screws (95). Tip: Start all screws before
	95
tightening any of them. Avoid pinching the
	Avoid pinching the
Wire Harness (48) between the Upright and
	Wire Harness (48)
the Frame.
	during this step

9. Apply a generous amount of grease to the Pivot	9
Axle (65) and insert it into the Frame (2).
	86
Orient the two Frame Covers (17) as shown.
Attach the Frame Covers to the Frame (2) with
four M4 x 16mm Screws (86).		2
	17	17
		Grease
		86
		65
	9