10
11
11. Identify the Right Handlebar (48), which is
marked with a hRighti sticker, and orient it as
shown. Make sure that the hexagonal holes
are in the location shown.
Attach the Right Handlebar (48) to the right side
of the Upright (3) with two M8 x 38mm Bolts (53)
and two M8 Locknuts (37). Make sure that the
Locknuts are in the hexagonal holes.
Attach the Left Handlebar (47) in the
same way.
47
Hexagonal
Holes
48
53
37
3
12. The Console (6) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may damage
the console displays or other electronic com-
ponents. Remove the screws and the battery
covers, insert batteries into the battery compart-
ments, and reattach the battery covers. Make
sure to orient the batteries as shown by the
diagrams inside the battery compartments.
To purchase an optional power adapter, call
the telephone number on the front cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter. Plug one end of the power adapter into
the receptacle on the console; plug the other
end into an outlet installed in accordance with all
local codes and ordinances.
6
Batteries
Batteries
Screws
Battery
Covers
12