6.Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75).
6.Touch the Right Handrail (72) to discharge any static. Press the end of the Upright Wire (42) into the socket in the bottom of the Console Base (47). The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it.
7.Set the Console Base (47) on the Right Handrail (72) and the Left Handrail (71). Attach the Console Base with four 1/2” Screws (48). Start all four Screws before tighten- ing them; do not overtighten the Screws.
5 |
|
| Ground |
| Wire |
| 47 |
| Small |
| Hole |
| 75 |
| 71 |
6 |
|
| 72 |
| 42 |
| 47 |
7 | 47 |
| |
72 | 71 |
| 48 |
| 48 |
8
