13
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 23 and 24).
15. If necessary, press the Left and Right Trays
(103, 104) into the console assembly.
103
104
15
Console
Assembly
16. Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Attachthe lower end of the Storage Latch(51) to
theBase (95) with a 3/8" x 1 3/4" Screw (6).
Attach the upper end of the Storage Latch (51)
to the Frame (55) with a 3/8" x 2" Bolt (8) and a
3/8" Nut (10).
Lowerthe Frame (55) (see HOW TO LOWER
THE TREADMILLFOR USE on page 21).
51
95
10
Large
Barrel
6
55
16
8
Latch
Knob