![](/images/new-backgrounds/1320210/32021011x1.webp)
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver ![](/images/new-backgrounds/1320210/32021011xi2.webp)
.
Note: The underside of the treadmill walking belt is coated with
1.With the help of a second person, carefully raise the Uprights (82) until the treadmill is in the position shown.
2.With the help of a second person, carefully lower the treadmill frame to the floor.
Remove the Lock Knob (110) from the Lock Pin (114).
Make sure that the Lock Pin Collar (112) and the Spring (111) are on the Lock Pin as shown. Insert the Lock Pin into the Latch Bracket (77).
Tighten the Lock Knob (110) onto the Lock Pin (114).
3.Refer to drawing 3a. Press a Handrail Insert (102) into the lower end of a Handrail (85). Hold an Extension Leg (103) against the lower end of the Handrail. Insert a Handrail Bolt (78) with a Handrail Washer (36) into the Extension Leg and thread the Handrail Bolt three or four turns into the Handrail. Notice the angle of the Handrail and insert the Handrail Bolt and Washer at the same angle (see drawing 3b).
Attach a Handrail Insert (102) and an Extension Leg (103) to the other Handrail (85) in the same way.
1 |
|
|
|
|
| 82 |
|
2 |
|
|
|
110 |
|
|
|
77 |
|
|
|
| 111 | 112 |
|
|
|
| 114 |
3a | 3b |
| |
85 |
|
|
|
102 | 103 | 85 | |
|
| ||
| 103 |
| 36 |
|
|
| |
36 |
|
| 78 |
|
|
| |
78 |
|
|
|
6