6. Attach the Left Upright (81) to the Base (90) with | 6 |
|
| 81 |
|
a 3/8" x 3 1/2" Patch Bolt (8), a 3/8" x 1 1/2" |
|
|
| ||
Patch Bolt (6), and two 3/8" Star Washers (12) |
|
| 90 |
|
|
in the indicated locations. Partially tighten the |
|
|
|
| |
Patch Bolts until the heads of the Patch Bolts |
|
|
|
|
|
touch the Base; do not fully tighten the Patch |
| 12 |
|
|
|
Bolts yet. |
|
|
|
| |
With the help of a second person, tip the tread- | 8 | 6 | 12 |
|
|
mill so that the Base (90) is flat on the floor. |
|
| |||
7. Orient the Crossbar (82) so that the indicated | 7 |
|
| 3 |
|
bump is in the position shown. (Note: The bump |
|
|
| ||
will go into a hole in the Right Upright [83].) |
|
|
|
|
|
Attach the Crossbar to the Left Upright (81) and |
|
|
|
|
|
the Right Upright with four 1/4" x 5/8" Bolts (3); |
|
|
| 82 | 3 |
do not tighten the Bolts yet. |
|
|
| ||
|
|
|
| 81 | Bump |
|
|
|
| 83 | |
|
|
|
|
| |
8. Identify the Right Handrail (78), which is marked | 8 |
|
|
|
|
with a sticker. Insert the end of the Wire |
|
|
|
| |
Harness (84) into the hole in the bottom of the |
|
|
|
|
|
Right Handrail and pull it out of the hole in the |
|
|
| 84 |
|
top. |
|
|
|
| |
|
|
|
| 78 |
|
| 9 |
|
|
|
|
