Profoto 300 manual Modelling Lamp, READYLAMP/TEST Button, Photocell

English – ComPact

MODELLING LAMP (4)

dThe modelling light consists of a lamp that is fed directly from the mains. It is therefore important to check that the lamp has a rated voltage that matches that of the mains. The lamp supplied as standard is a 150 - 250W halogen lamp with an E27base (ComPactSpecial 300 and ComPactSpecial 600) or a 500W halogen lamp with an E11Minican base with the ComPact1200.

The ComPact300 and ComPact600 can also be supplied with a normal 100Wlamp with an E27base. Toimprove the correspondence between the modelling light and flash, the flash tube and modelling lamp is enclosed in a frosted glass cover (standard in all models with halogen modelling lamps).

eFLASH TUBE, DISCHARGETHE POWER IN THE UNIT

BYPRESSINGTHE TEST BUTTON ATTHE SAME TIME AS SWITCHING OFFTHE MAIN SWITCH.BEFORE YOUCHANGE THE MODELLING LAMP OR

READYLAMP/TEST BUTTON (5)

The ready lamp/test button has two functions. First, it lights up when the unit is fully charged. Second, it can be used to manually sync (trigger) the unit (open flash). When a lower energy setting is chosen , trigger a flash so that the unit can recycle for the new energy setting.

PHOTOCELL

The units has a built-in photocell. The photocell in the unit serves as a slave sync when another flash is triggered. The photocell is automatically disabled when a sync cable is plugged in.

The Light Shap ing Company 11 Profot o