Sync via cable
1. Connect a sync cord from the camera to the Sync Connector [12] on the D1 unit.
Sync via IR
1. Press and hold down the Slave Button [8a] until the IR Indicator [8c] is illuminated.
Sync via radio (D1without Profoto Air)
1.Connect a ProfotoAir Remote or ProfotoAir Sync device (Receiver) with a cable to the Sync Connector [12] on the D1 unit.
2.Follow the instructions for genera tors without
Sync via radio (D1with Profoto Air)
1.Press and hold down the Slave Button [8a] until the RADIO Indicator [8b] is illuminated.
2.Select radio channel by following theRadio settings instructions below.
3.Connect a ProfotoAir Remote or ProfotoAir Sync device to the camera.
4.Follow the instructions for generators with
Radio settings (D1with Profoto Air)
For sync via radio,the same radio channel has to be set on the D1 unit and the ProfotoAir device or the Profoto StudioAir program.
For remote control using ProfotoAir Remote, the same radio channel and group have to be set on the D1 unit and the ProfotoAir device.
For remote control using ProfotoAir USB and Profoto StudioAir, the same radio channel has to be set on the D1 unit and in the Profoto StudioAir program.
1.Verify that the RADIO Indicator [8b] is illuminated on the D1 unit.
2.Press the Channel Set Button [6]. The Display [1] will start flashing, showing the current radio channel number to the left and the radio group letter to the right.
3.While the Display [1] is flashing,turn theSetting Knob [7] clockwise to increase the radio channel number 1( to8) and
4.While the Display [1] is flashing,press and hold down and turn the Setting Knob [7] clockwise to increase the group letterA( toF) and
5.Wait until the Display [1] stops flashing(The. Display [1] will now show the energy level of the flash light.)
For radio channel and group settings on the ProfotoAir devices and the Profoto StudioAir program, please refer to the corresponding User’Guide.
AirStudio
Profoto–
USBAir
Profoto
15
www.profoto.com