ProMaster specifications Installing the Batteries, Mounting the LED30 Light, Specifications

Camera/Camcorder Light

LED30

Thank you for purchasing the PROMASTER® LED30 Camera/Camcorder Light.

Please read the following instructions before use.

Installing the Batteries

Gently remove the cover on the back of the light.

Insert 2 AA batteries (not included) into the battery compartment.

Be sure to observe the correct polarity (+,-) as indicated.

After the batteries are properly installed, use the on/off switch to power the light.

Mounting the LED30 Light

You can mount your LED30 Camera/Camcorder light to the built-in accessory shoe on your camera or camcorder. If your camera or camcorder does not have an accessory shoe, use the included mounting bracket as follows:

Connect screw (A) to the tripod mount of your camcorder/camera.

Slide your light into the accessory shoe (B) of the bracket

BA

Specifications

Light source:	30-5mm super bright LED lamps
Beam angle:	60°
Luminance:	23 Lux @ 10’
Color rendering index:	≥85
Color temperature:	5600K
LED longevity:	>10000h
Power input:	AA Battery × 2
Housing size(mm):	100 x 45 x 32
Weight(g):	60

Code 7193

Made in China

www.promaster.com

Fairfield, CT 06611