ProScan PLCD5085A manual Do not mount your PROSCAN TV at more than a 15 degree tilt

Models: PLCD5085A

1 24
Download 24 pages 26 Kb
Page 9
Image 9
-Do not mount your PROSCAN TV at more than a 15 degree tilt.

Introduction

3. Instruction for Wall Mount

A wall mount kit (purchased separately) would allow you to mount your PROSCAN TV on the wall. For detailed information on installing the wall mount, refer

to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. PROSCAN is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.

Dimensions for Mounting Hole Pattern

400mm

400mm

-This PROSCAN TV is compatible with a 400mm x 400mm mounting hole pattern.

-4 pcs of type M5 screws are required for installing the wall mount bracket to

your PROSCAN TV. Do not use screws that are longer than 12 mm. Screws that are too long may cause damage to the inside of the TV set.

-Do not fasten the screws too tight for this may damage the TV or cause the

TV to fall, resulting in personal injury. PROSCAN is not liable for these kinds of incidents

-Do not mount your PROSCAN TV at more than a 15 degree tilt.

-Always use two people to mount the TV to a wall.

-Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

7

Page 9
Image 9
ProScan PLCD5085A manual Do not mount your PROSCAN TV at more than a 15 degree tilt