CONNECTIONS

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or timelapse VCR.

2Power supply choices

•Use a commercially available 24 V AC adaptor. Make sure to use a cable with an earth line (22AWG or more) to connect to the earth connector. (Fig.1.)

•When using a DC 12 V power supply, make the connections as indicated in Fig. 2.

CAUTION:

To prevent camera and/or power supply failure, pay close attention to polarity when making the connections.

3Insert the plug of this power supply into a wall outlet.

Adjust the picture on the monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

Note: Use CCTV/Video-grade coaxial cable.

10English