®
Getting Started
Owner’s Reference GCP Stereo Preamplifier
Location
Cautions
Once your new GCC Series Control Amplifi er is unpacked, you’ll need to fi nd a convenient place to set it. Placing the Control Amp nearest to your source equipment is probably the best idea since you will want to have as short an interconnect between the source and the Control Amplifi er as you can.
There are several ways to mount the GCC Series Control Amplifi er: on a rack shelf or on a shelf near your sources.
If the GCC Series Control Amplifi er is to be placed on the fl oor or carpet, make sure the unit is not going to come in contact with water or cleaning solvents. Make sure the carpet does not interfere with airfl ow to the amp.
Isolation
Power Cables
Conditioners
The GCC Series Control Amplifi er can benefi t from aftermarket isolation devices such as cones, spikes and Sorbothane pads.
Once you have chosen the location for the GCC Series Control Amplifi er you can use the supplied AC power cord to connect it to the AC wall receptacle or you can use an aftermarket power cord and receptacle.
We strongly recommend the use of a PS Audio xStream Power™ AC cable and a PS Power Port™ AC receptacle to feed the GCC Control Amplifi er power. While the supplied power cable is adequate for the task it is not going to provide the best performance. Choosing any xStream Power cable will make a signifi cant performance improvement over the stock power cable.
We recommend the use of power conditioning equipment, such as a PS Audio Power Plant, UPC- 200 or any of the Ultimate Outlet or Power Director series from PS. We do not recommend the use of simple AC fi lter power conditioners, not made by PS Audio, as most of these will ”bleach” the sound and rob the music or video soundtrack of some measure of life and dynamics. If you do not use PS Audio power conditioning equipment, you would be advised to plug the GCC Control Amplifi er directly into the AC wall receptacle.
4826 Sterling Drive, Boulder, CO 80301 |
|
PH: 720.406.8946 service@psaudio.com www.psaudio.com | Getting Started 1 |
©2004 PS Audio International Inc. All rights reserved.
