CHS80 High Performance In-Cabinet Speaker
•
•Five Driver,
•Two crossover compensation switches adjust for
•Tough, textured, matte black fi nish
Frequency Range | |
Recommended Power: | |
Impedance: | 4 Ohms |
Sensitivity (1W (2.83V) @1m) |
|
Anechoic Chamber: | 87dB SPL |
Typical Listening Room: | 89dB SPL |
Drivers: | 2 x 8” Woofers, |
| 2 x 4 1/2” Midranges, |
| 1” Dome Tweeter |
Dimensions (W x H x D): | 17 x 24 x 12 3/4” (grille on) |
| 17 x 24 x 12” (grille off) |
17" | 12" |
432mm | 305mm |
24"
610mm
12.75"
324mm 
w/grille
Note: Depth dimensions exclude rear speaker connectors.
Add 1” plus required wire spacing.
Installation Notes
•Try to install the systems at a height equal to ear level when seated.
•The Midrange/Tweeter/Midrange array should always be vertical.
•Open volume in equipment cabinet surrounding the CHS80 should be lightly fi lled with fi berglass or acoustical foam to reduce cavity resonance.
•Don’t recess the system any farther into cabinet than necessary.
•Confi rm that media center grille frames do not block sound to any listener, especially of midranges or tweeter.
•Engage boundary switch when cabinet mounted.
•Engage “Screen Perforation” switch when mounted behind a perforated screen.
•All PSB
•All PSB CHS models are compatible with Platinum C4 and C2 Center Channel Speakers.
•See manual for more installation hints.
To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342
PSB Speakers reserves the right to change specifications or features without notice. © 2004 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 10/04. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers.
w w w. p s b s p e a k e r s . c o m
1 8 8 8 7 7 2 0 0 0 0
