Instructions for using the Shock Mount:
1.The SGM1 Microphone must be properly threaded through the silicone bands. Please see photo for proper band placement around the microphone:
Note how SGM1 Microphone is threaded through the silicone bands
2.Install the foam windscreen for all outdoor use and for indoor use where air- conditioning rumble may be a problem.
3.Install the Koala MiniMax tm High Wind Fur Cover when working outdoors in high wind conditions. To install the Koala MiniMax Cover, carefully pull it over the foam windscreen. Secure with the attached Velcro straps.
4.To change from one adapter to another simply remove the thumbscrew located on the base of the shock mount and replace the adapter with the other style. Be sure to include the rubber washer between the shock mount body and the adapter. This same thumbscrew can be used to tilt the microphone up or down on it’s axis. Simply loosen the thumbscrew and reposition the microphone to your desired position and then
