PVI Industries Gas-Fired Water Heater warranty Platinum Condensing Gas-Firedwater Heater

PLATINUM® CONDENSING GAS-FIRED WATER HEATER

POLYSHIELD® POLYMER-LINED TANK

STANDARD FEATURES AND EQUIPMENT

•POLYSHIELD® polymer-lined tank with 5-year warranty

•Five-year heat exchanger warranty

•One-year cost-free service policy

•Factory authorized startup

•Up to 94% thermal efficiency

•Electronic temperature control with LED readout; accurate to ± 1°F

•Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes

•100% submerged combustion

•Heat exchanger ASME stamped for 160 psi operating pressure

•Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered

•Nonferrous, removable fittings at all tank connections

•Fan assisted, pre-mix, stainless steel burner

•Two safety shut off valves (single body)

•NOx emission levels compliant with SCAQMD

•Air proving switch

•Electronic combustion sequencer and safeguard with pre-purge

•Operating thermostat

•Redundant high limits with automatic reset

•ASME-rated temperature and 150 psi pressure relief valve

•Drain valve

•Fiberglass insulated tank

•Durable, corrosion-resistant, polyethylene jacket

•Heavy-duty steel stand

•Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal

•23"-diameter tank access after heat exchanger removal

•ASHRAE 90.1 compliant for thermal efficiency and standby loss

•UL listed for PVC venting material

•UL listed for zero clearance from combustible walls (non-combustible floor only)

•UL listed for NSF-5 compliance

•FM compliant

OPTIONAL FEATURES AND EQUIPMENT

Electronic low water cutoff

Manual-reset, immersion temperature limiting device

Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others) Water pressure gauge

L.P. gas operation

Condensate neutralization system

CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset temperature limiting device)

AGA-rated temperature and pressure relief valve Tridicator (field installed)

Lifting attachments

Other agency compliance _______________________ (consult factory)

See complete warranty and/or service policy for details

	PVI INDUSTRIES, LLC	PVI reserves the right to change
	FORT WORTH, TEXAS 76111	the design and specification
PV6801 10/08	(800) 784-8326 ▪ (817) 335-9531 ▪ www.pvi.com	without notice.