SPECIFICATION FOR DOMESTIC WATER HEATERS
Power Combustion, Gas/Oil Fired Water Heaters with
(continued)
Safety Controls
As a minimum, the heater will be equipped with the following:
•electronic flame safeguard with
•two immersion operating thermostats
•an immersion temperature limiting device
•an ____ ASME or ____
•and options as selected on form PV 6000
| Warranty Summary |
Storage tank: | _____ year (5 standard, 15 optional) Covers manufacturing or material defects, |
| leaks and /or the production of rusty water. Tank coverage will include failure due |
| to scale buildup for ____ full years (3 standard, 6 optional) and ____ prorated years |
| (2 standard, 9 optional) with no provision or condition for maintenance or |
| inspections and no limitations on water chemistry. |
Heat exchanger |
|
and combustion chamber: | 5 year. Covers manufacturing or material defects, leaks, and/or the |
| production of rusty water. |
Burner and all heater parts: | 1 year |
The heater will have a _____ first year or ____
costs under certain conditions. Initiation and /or continuation of warranty coverage will not be dependent upon annual inspections, regular replacement of anode rods, or water chemistry. Complete copies of all warranties and service policies, including all exclusions and conditions, will be presented to the owner as part of the submittal package. These summaries are not warranties. Consult warranty and policies for full details.
Finishing
The storage and heating sections will be completely factory packaged, requiring only job site hookup to utilities, venting, and plumbing. The heater will be insulated, jacketed with enameled steel panels, and mounted on
Start Up
Start up on the unit will be performed by factory trained and authorized personnel. A copy of the start up report will be provided to the owner.
PV 6115 6/03 | 2 |