PYLE Audio 324MAG Functional Description, Assembly Operation, Foreword, Removing the Blade

FUNCTIONAL DESCRIPTION

FOREWORD

Your Porter-Cable circular saw is designed for use with 7-1/4" diameter blades that have a 5/8" diameter bore. Blades must be rated for 6000 RPM operation (or higher).

BLADE BRAKE (MODEL 325MAG ONLY)

Model 325MAG is equipped with an electric blade brake that energizes automatically when the trigger switch is released.

ASSEMBLY

NOTE: This tool is shipped completely assembled. No assembly time or tools are required.

OPERATION

REMOVING THE BLADE

Disconnect the tool from the power source!

DO NOT USE the Quick Change™ blade clamp with any product other than specified Porter-Cable tools 324MAG

and 325MAG.

Avoid contact with the blade teeth to prevent personal injury.

This tool is equipped with a Quik-Change™ blade clamp and is designed to be tightened hand-tight

only. The use of external tools may cause damage to the blade clamp.

1.Push in the arbor lock button (A) Fig. 1 and rotate the blade by hand until the lock engages the blade arbor.

2.While pressing the arbor lock button, extend the lever on the Quik-Change blade clamp (A) Fig. 2 and turn it counter- clockwise.

Fig. 1

A

3.Remove the Quik-Change blade clamp, release the arbor lock button, and remove the outer blade flange.

4.Retract the telescoping guard (A) Fig. 3 and remove the blade.

NOTE: DO NOT use wet lubricants on the Quik-Change blade clamp.

A

A

Fig. 2 Fig. 3

10