PYLE Audio PCA4 manual Blue LED Output Level Display Power On/Off and LED Indicator

Models: PCA4

1 8
Download 8 pages 5.37 Kb
Page 4
Image 4

FEATURES AND CONTROLS

(1)Blue LED Output Level Display

(2)Power On/Off and LED Indicator

Main power switch, the indicator lights when the amplifier is turned on.

(3) CD/MP3 3.5mm AUX Input Jack (FRONT)

Lets you easily connect the computerized MP3 Device (player) sources, such as PC (CD ROM), Laptop, Walkman, iPod, and Cell Phone.

(4) MASTER Volume Control

Lets you control the overall volume level.

(5) BASS and TREBLE Controls

Allows you to boost or attenuate bass and treble for the desired sound.

(6) LINE RCA Input

Lets you connect most high level audio sources such as CD player, tape deck, tuner, camcorder, or VCR. It is compatible with the computerized devices (MP3) via 3.5mm to RCA Converter.

(7) Push Type Speaker Terminal

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output.

The total speaker impedance must be at least 4-Ohm per channel at stereo mode.

(8) 110/220 Voltage Selector

This amplifier has selectable input voltage from 110V/60Hz (the standard

in USA and CANADA) to 220V/50Hz (for EUROPEAN operation). Please make sure the switch is in the proper position before operating, otherwise,

the severe damage will be incurred and not covered by the warranty.

(9) Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and if necessary replace it with a 1.5-amp, 250-volt, fast-acting, 5x20mm fuse (not supplied).

3 - Pyle Pro PCA4 Manual

Page 4
Image 4
PYLE Audio PCA4 manual Blue LED Output Level Display Power On/Off and LED Indicator