PYLE Audio PDCD510MU manual Prog And Folder Connersion Button

7.PROG AND FOLDER CONNERSION BUTTON

In STOP mode, you can program several tracks (20 tracks max):

-Press the STOP button to enter in the stop mode

-Press the PROG button to enter in the program mode

-Use the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice.

-Use one more time the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice.

-Repeat the operation to select all the track you want to listen

-Press the play / pause button to start the playback

8.OUT BUTTON (LOOP BUTTON)

When you press this button, you set the end point of the seamless loop and you start the loop. To finish the loop, press again this button.

9.RELOOP BUTTON(LOOP SYSTEM)

This button is used to start the last saved loop. To finish the loop, press the reloop button.

10.SKIP I<< BUTTON

This button selects the last track to be player.

11.PITCH BEND +/- BUTTON

The CUE function allows the CD to be played from the memorized point any numbers of times, with the unit in pause mode. Press the CUE button to set up the memorized CUE point and then the CUE button blinks.

12.+10 BUTTON

Use this button to jump of 10 tracks in one press.

13.PLAY / PAUSE BUTTON

Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.

14.SKIP >>I BUTTON

Uses the button select the next track to be player.

15.PITCH CONTROL

Use this fader to increase or decrease the speed of the track.

16.PITCH BEND +/- BUTTON

When each to two CD player is playing the pitch bend function allows the button beat when mixing from one song to anther.

17.PITCH BUTTON

If you push this button, the adjustement of the pitch potentiometer is available.

18.DISPLAY

This LCD Display indicates track Numbers,Time,Remain,pitch,Single,Continue and Time Bar

19.DISC-TRAY

To enter the disc, please refer to the explanations under 6.2 CD-tray.

20.OPEN/CLOSE BUTTON

The Disc is placed on this tray pressing the Disc tray open/close buttons will open or close the tray

21.SEARCH BUTTON

Press this button to switch the single and continues play mode.The select mode is indicated on the LCD.In SINGLE mode, after each track,the unit pauses the beginning of the next track in continues mode,the unit plays all tracks.

22.USB PORT

Support USB playing and you may also connect the computer with the USB cable but only when enter into USB work mode.

3