PYLE Audio PDCD770 Cont. / Single Button, Prog Button, Out Button Loop Button, Skip I Button

6.CONT. / SINGLE BUTTON

Press this button to switch the single and continues play mode.The select mode is indicated on the LCD.In SINGLE mode, after each track,the unit pauses the beginning of the next track in continues mode,the unit plays all tracks.

7.PROG BUTTON

In STOP mode, you can program several tracks (20 tracks max):

-Press the STOP button to enter in the stop mode

-Press the PROG button to enter in the program mode

-Use the skip track buttons to choose the track you want to listen then press the prog button to enter you choice.

-Use one more time the skip track buttons to choose the track you want to listen then press the PROG button to enter you choice.

-Repeat the operation to select all the track you want to listen

-Press the PLAY / PAUSE button to start the playback

8.OUT BUTTON ( LOOP BUTTON )

When you press this button, you set the end point of the seamless loop and you start the loop. To finish the loop, press again this button.

9.TRACK SELECT BUTTONS

Pressing 0-9 buttons allows you direct access to select tracks from the CD。

10.RELOOP BUTTON ( LOOP SYSTEM )

This button is used to start the last saved loop. To finish the loop, press the reloop button.

11.SKIP I<< BUTTON

This button selects the last track to be played。

12.CUE BUTTON

The CUE function allows the CD to be played from the memorized point any numbers of times, with the unit in pause mode. Press the CUE button to set up the memorized CUE point and then the CUE button blinks.

13.+10 BUTTON

Use this button to forward 10 tracks in one press.

14.PLAY / PAUSE BUTTON

Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.

15.SKIP >>I BUTTON

Use this button to select the next track to be played

16.PITCH CONTROL

Use this control slider to increase or decrease the speed playback。

17.PITCH BEND +/- BUTTON

When each of the two CD Players is Playing,the pitch bend function allows the position of the BASS beat to be matched after the pitch has been adjusted。

18.PITCH BUTTON

If you push this button, the adjustment of the pitch control is available。

19.DISPLAY

This LCD Display indicates track Numbers,Time,Remain,pitch,Single,Continue and Time Bar。.

20.DISC-TRAY

To enter the disc, please refer to the explanations under 6.2 CD-tray.

3