TROUBLE SHOOTING
SYMPTOM A: NO AC POWER OUTPUT, THE RED LED LIGHTS.
POSSIBLE CAUSES | SUGGESTION |
|
|
The connected AC products are rated at more than 600 Watts | Use the product with a total power rating |
(PINV4) , 800 Watts (PINV5) or 1000 Watts (PINV6), the | less than 600 Watts (PINV4) , 800 Watts |
overload shutdown occurred. | (PINV5) and 1000 Watts (PINV6) . |
|
|
The connected AC products are rated at less than 600 Watts | Use the product not exceeds the inverter's |
(PINV4) , 800 Watts (PINV5) or 1000 Watts (PINV6), the high | surge capacity, 1200 Watts (PINV4) , 1600 |
starting surge causes the overload shutdown. | Watts (PINV5) and 2000 Watts (PINV6) . |
|
|
The battery is discharged (alarm sounds) | Recharge battery. |
|
|
The inverter overheated | Turn off the inverter and allow to cool for |
| 15 minutes. Clear blocked fan (PINV4 / |
| PINV5 / PINV6) or remove the objects |
| covering the ventilation. |
|
|
SYMPTOM B: NO AC POWER OUTPUT, NO LED LIGHTS ARE ON. | |
|
|
POSSIBLE CAUSES | SUGGESTION |
|
|
The fuse of inverter is blown | Check to make sure the inverter is |
| connected to a power source with correct |
| voltage and polarity. |
| Replace fuse. |
|
|
The inverter has been connected with reverse DC input | The inverter needs repairment |
polarity. | if the probable damage has occurred. |
|
|
6
