10
RADIO OPERATION• SWITCHING TO RADIO MODE
Press MODE button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
• SELECTING THE FREQUENCY
BAND
At radio mode, press BND/LOU (ENT)
button (13) shortly to select the desired
band.
The reception band will change in the
following order:
• SELECTING STATION
Press button (17) or button (16)
shortly to activate automatic seek
function. Press for several seconds
until “MANUAL” appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds, they
will return to seek tuning mode and
“AUTO” appears on the display.
• AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS (D-AUD) button (18) for
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
- Program scanning
Press AMS (D-AUD) button (18)
shortly to scan preset station. When
the field strength level is more than
the threshold level of stop level, the
radio is holding at that preset
number for several seconds with
release mute, then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
OPERATION
2ND beeps come out ), current station
is stored into the number button.
• LOCAL/DISTANT
Press LOC button (2) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is effect during AUTO SEEK
operation.
• MONO/STEREO
Press MON/ST button (1) to select
mono or stereo mode. You can
sometimes improve reception of
distant stations by selection mono
operation.
CD OPERATION
• SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance. The CD is drawn into the
driver automatically. CD playback
begins.
If a CD is already inserted in the driver:
Keep pressing MODE button (6) shortly
until the CD mode display appears.
• SELECTING TRACKS
Press button (16) or button (17) to
move to the previous track or the
following track. Track number shows
on display.
Hold button (16) or button (17) to
fast reverse or fast forward. CD play
starts from when you release the button.
• PAUSING PLAYING
Press button (20) to pause CD
player. Press it again to resume play.
• PREVIEWING ALL TRACKS
Press SCN button (21) to play first
several seconds of each track on the
current disc. Press it again to stop
intro and listen to track.
• REPEATING THE SAME TRACK
Press RPT button (22) to continuously
repeat the same track. Press it again
to stop repeat.
FM1 FM2 FM3 AM