OPERATION
16
DISC NOTE
A. Notes on discs:
1.Attempting to use non-standard shape
discs (e.g. square, start, heart) may
damage the unit. Be sure to use round
shape CD discs only for this unit.
2.Do not stick paper or tape etc., onto
the label side or the recording side of
any discs, as it may cause a
malfunction.
3.Dirt, dust, scratches and warping discs
will cause misoperation.
B. Notes on CD-Rs (recordable
CDs)/CD-RWs (rewritable CDs):
1.Be sure to use discs with following
marks only for the unit to play:
2.The unit cannot play a CD-R and
CD-RW that is not finalized.
(Please refer to the manual of your
CD-R/CD-RW recorder or CD-R/
CD-RW software for more information
on finalization process).
3.Depending on the recording status,
conditions of the disc and the
equipment used for the recording,
some CD-Rs/CD-RWs may not be
played on this unit. (See *1)
*1: To have more reliable play back,
please see following
recommendations:
a.Use CD-RWs with speed 1x to 4x
and write with speed 1x to 2x.
b.Use CD-Rs with speed 1x to 8x and
write with speed 1x to 2x.
c.Do not play a CD-RW which has
been written for more than 5 times.
Recordable Rewritable
DIRECT TRACK ACCESS
Pressing number buttons 0~9(14) (i.e.
19~28) can activate DIRECT TRACK
ACCESS according to your need. For
example, press button (19), and “T-01”
will be flashing on the display. Then press
button (20), “T-12” will appear and track
12 will be selected to play. If you don’t
press any button when “T-01” is flashing.
After several seconds, “T-01” doesn’t flash
and track 1 is selected to play. If you
select a track number that doesn’t belong
to the current disc, “NO TR” will appear
on the display.
REPEATING THE SAME TRACK
Hold press RPT button (21) for several
seconds to continuously repeat the same
track. Hold press it for several seconds
again to stop repeat.
PLAYING ALL TRACKS IN RANDOM
Hold press SHF button (22) for several
seconds to play all tracks on the current
disc in random. Hold press it for several
seconds again to cancel the function.
PREVIEWING ALL TRACKS
Hold press SCN button (23) for several
seconds to play first several seconds of
each track on current disc. Hold press it
again for several seconds to stop intro
scan and listen to track.
TRACK/TIME DISPLAY
Press AS/PS (ELAPSE) button (2) to show
running time of track.
SELECTING DISC
Press SHIFT/SCAN button (13) to shift
mode and then “SHIFT” will appear on
the display. At shift mode, press CH
button (16) or CH button (17) to select
previous disc or next disc. If there isn’t
any operation for several seconds, it will
exit shift mode automatically. At shift
mode, you can also press number button
0~9 (14) (i.e. 19~28) to select the disc
directly. If you select 3# disc (press button
(21), and there isn’t a disc in the 3# slot,
“NO CD” will appear.