BASIC OPERATION
- In CDP mode : CDP -> (CLOCK)-> (PS)->FREQ. -> (PTY) ->
Each displaying time is 5 sec, and comeback to 1'st position after 5 sec. When pressed long, until time flashes. and you can adjust time now.
To adjust hour:
with time be flashed on display, push the tune 
button to adjust hour. When adjustment is completed, release the button.
To adjust minute:
with time be flashed on display, push the tune 
button to adjust minute. When adjustment is completed, release the button.
2. "AF SEARCH" mode.
When "AF SEARCH" mode is selected ("AF" segment is turned on), Pressed short, it shows each "AF" sequentially.
15.MUTE BUTTON
Press it to eliminate the sound immediately.
16.BAND/TA ( FOR RDS) BUTTON
Press it to select your desired radio band and the band which is selected will be displayed on LCD.
TA function [TRAFFIC ANNOUNCEMENT] BUTTON (FOR RDS ONLY)
When pressed short, 1). RADIO mode
Depending on the installed option diode matrix, LW/MW/FM band is toggled
cyclically through the tuning bands. |
|
or | |
or | |
or | |
Refer to the explanation of diode matrix. |
|
2). CDP mode |
|
changed the mode to Radio mode. |
|
When pressed long, it is engaging whether TA mode on or off. When TA mode is on and a traffic announcement is transmitted:
TA (INFO) - When the unit was in CDP mode, it will switch temporarily to radio mode.
-If the volume level was under the threshold point it will be raised to the threshold point.
But the user changed the volume level which was more than the threshold point. (min .TA volume level), it will be set to the last level.
When TA mode is on,TA of individual segment is turned on.
-When a TP station is received,TP of individual segment is turned on.
The current traffic announcement is canceled by pressing this key. But the TA mode will not be off.
17.POWER BUTTON
Press it to turn on or off the unit.
3
