OPERATION
For Electrical Volume:
By pressing AUDIO CONTROL 
button (11) or AUDIO CONTROL 
button (12), it is possible to adjust the desired sound quality.
For Digital Rotating Volume: By rotating the knob (11 & 12) clockwise or
•LOUDNESS
Press BND/LOU button (13) to increase bass output and display will show “LOUD”. Press it again to release this function.
•SET THE CLOCK
Press and hold DSP button (15) until the clock is shown on the display and flashed.
Then press the TUNE/SKIP/TRACK
button (17) to change hours or
TUNE/SKIP/TRACK 
button (16) to change minutes.
•SELECT MODE
Press MOD button (6) to choose desired listening mode.
(e.g. radio mode to CD)
•MUTE
Press MUT button (2) to silence the receiver. Press it again to release the mode.
•LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (8).
•EQUALIZATION
Press EQ button (1) to turn on equalization function and to select desired audio mode. There are four kinds of mode as below:
FLAT 
CLASSICS 
POP M 
ROCK M
DSP OFF
•REMOTE SENSOR
Point the remote control handset to the remote sensor RX (23). Press the function keys on the handset to control the system.
•RESET
Reset button (24) is placed on the front panel and must be activated with either a ball point pen or thin metal object.
The reset button is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button (24), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
•BAND SELECTION
At tuner mode, press BND/LOU button (13) to select the desired band.
The reception band will change in the following order:
FM1 
FM2 
FM3 
AM
•STATION SELECTION
Press TUNE/SKIP/TRACK 
button
(16)or TUNE/SKIP/TRACK 
button
(17)shortly to activate automatic seek function. Press for several seconds until “MANUAL” appeared on the display, the manual tuning mode is selected. If both buttons have not pressed for several seconds, they will
8
