PYLE Audio PLCD80M instruction manual Power Button, Flashing LED, Reset, Scan Button

Models: PLCD80M

1 12
Download 12 pages 38.4 Kb
Page 6
Image 6

BASIC OPERATION

H.NOTE:

a.This unit can only read MP3 disc in Id3v2.

b.This model also has song name (character) search function for MP3 disc playback.Press APS/SEARCH button three times until CHAR SCH is shown on display then press SEL/MENU button once, character A blinks, use VOL+/- buttons to select the right character(1 letter of desired song name), press SEL/MENU button to confirm your choice and second character A blinks for you to select, similar operation to enter other letters(max. 5 characters), After entering your song name,press SEL/MENU button more than 1 second to start the search. If no such song, NOT FND will be shown on display.

19.BAND/ID3:

During radio mode:Press it to select your desired radio band and the band which is selected will be displayed on LCD.

During mp3 mode :Press search button to working Id3 as follow: (depend on the disc used for Mp3)

File folder song artist album

20.POWER BUTTON

Press it(more than 1 second) to turn off and short press to turn on the unit.

21.FLASHING LED

If the front panel is not on the main unit, LED will be flashing.

22.RESET

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons:

-Initial installation of the unit when all wiring is completed.

-All the function buttons do not operate.

-Error symbol on the display.

Note: If press RESET button, the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.

23.LOC

When in the radio mode,press it to select local or distance broadcast station receive sensitivity .

NOTE: The SCAN button on the remote controller(for RC version only)

SCAN BUTTON

Press it to scan up by one channel step with station detection. If a valid signal has detected, the current frequency is blinked with in 5 seconds, then press it again to stop scan and remain the current frequency; otherwise, the unit continue to scan up by one channel step with station detection 5 seconds later.

5

Page 6
Image 6
PYLE Audio PLCD80M instruction manual Power Button, Flashing LED, Reset, Scan Button