PYLE Audio PLCDCS220MP MP3 Operation, Switching to CD MP3 Mode, Selecting Tracks in Single Step

OPERATION

MP3 OPERATION

•SWITCHING TO CD (MP3) MODE

If there is no MP3 disc inserted in the driver:

Gently insert the MP3 disc with the printed side uppermost into the disc slot (5) until you feel some resistance. The MP3 disc is drawn into the driver automatically. The MP3 playback begins.

If a MP3 disc is already inserted in the driver:

Keep pressing MODE button (6) shortly until the CD (MP3) mode display appears.

•EJECTING A DISC

When the front panel is folded down, press the eject button (4) to eject the disc from the disc slot (5).

•SELECTING TRACKS IN SINGLE STEP

Press TUNE/TRACK/SKIP button

(16)or TUNE/TRACK/SKIP button

(17)to move to the previous track or the following track. Track number shows on display.

•PAUSING PLAYING

Press PAU button (19) to pause MP3 player. Press it again to resume play.

•PREVIEWING ALL TRACKS Press SCN button (20) to play first several seconds of each track on the current disc. Press again to stop intro and listen to track.

•REPEATING THE SAME TRACK Press RPT button (21) to continuously repeat the same track. Press it again to stop repeat.

•PLAYING ALL TRACKS IN RANDOM Press SHF button (22) to play all tracks on MP3 disc in random order. Press again to cancel the function.

•SELECTING TRACKS BY AMS/D- AUD BUTTON

AMS button is assigned as Digital Audio Mode selection button in MP3 operation.

When pressed, it is activated as selecting each mode of Digital Audio. “Searching track directly” => “Searching Directory or File Name”=> “Navigation” from root by

TUNE/TRACK/SKIP UP/DOWN buttons=> “Navigation” from current directory by TUNE/TRACK/SKIP UP/DOWN buttons.

Searching Track Directly

Press AMS (D-AUD)button for one time. It enters into “Searching track directly” in Digital Audio CD.

The unit searches the track selected by following direct numeric buttons:

M1-M6, MODE (7), TUNE/TRACK/SKIP DOWN (8), TUNE/TRACK/SKIP UP (9), DSP(0). If selected three digits, the unit searches the track at once. If selected one or two digits, the unit wait for BAND/LOUD (ENTER) button for seconds. The unit searches the track after few seconds, even if the enter button is not pressed.

Searching Directory or File Name Press AMS (D-AUD) button for two times. It enters into “Searching Directory or File Name” in Digital Audio CD.

The unit searches files and directories that have the same character which is inputted by the user pressing the corresponding buttons listed on the Table 1 below.

Explain as follows:

-Use the corresponding buttons to select the characters A to Z, blank, 0 to 9, _, -, +.

-Press PUSH SELECT button to confirm entry of each characters.

-Press BAND/LOUD (ENTER) button

to start the title search.

In case the selected title is a directory name, display will show (‘ ‘), then

-Use the TUNE/TRACK/SKIP UP/DOWN buttons to list all songs under this directory and select the title.

9