PYLE Audio PLCDUSB78MP3 Power ON/OFF Control, Band Selector, PRE-SCAN/AUTO-STORE Button

LOCATION OF CONTROLS FIGURE A

REMARK :

AT ANY TIME, IF THE WIRE IS DISCONNECTED, THE RESET SWITCH MUST BE PRESSED AGAIN BEFORE OPERATE THE RADIO (REFER TO PAGE 5 FOR DETAIL). OTHERWISE, THE RADIO MAY NOT WORK PROPERLY.

OPERATING INSTRUCTIONS

1.POWER ON/OFF CONTROL

Press the button to turn the power “ON” or “OFF”.

Note : The unit can be turn on by pressing any keys on the panel (except open/close button & disc eject button). It will help the user who cannot find the power button in dark.

2.BAND SELECTOR

Each time this button is pressed, the radio band is changed. The indication “FM1”, “FM2”, “FM3”, “MW1” or “MW2” will appear on the display according to your selection.

3.PRE-SCAN/AUTO-STORE BUTTON

This button allows you to enjoy “Preset Memory Scan” function by pushing it shortly, and “Auto-Store Memory” function by pushing it more than 2 seconds.

•PS (PRESET MEMORY SCAN) - It calls the memorized station frequencies (from 1-6) automatically every 5 seconds.

•AS (AUTO-STORE MEMORY) - It searches all station frequencies upward and memorize automatically 6 stations by catching the frequency which has scan-stop level, the memorized station is shown on LCD as “1” to “6”. After memorizing, auto-store memory function will be changed to “Preset Memory Scan” function automatically.

4.DISC SLOT

Holding the disc and insert into the disc slot. The disc mechanism will automatically engage into CD/MP3 play mode.

5.LCD DIGITAL DISPLAY

The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other

FUNCTIONS.

6.DISPLAY CONTROL

This button serves to show available information as following:

-Time

-Track No. / Playing Time (during CD and MP3 mode)

Page. 2

P / N : 570-F86902-01