BASIC OPERATION
4 
Loading a DVD/VCD/CD Disc
1.Turn the ignition on the accessory position.
2.Press the POWER button (1).
3.Insert the disc with printed side facing up into the disc slot (2).
4.The player starts playback automatically.
Ejecting a Disc
Press 
(EJECT) button (3) to eject the disc.
Stopping Play
-Brief press the 
(Stop) button to stop the unit playback, when press the 
(Play) button it can continuous normal playback.
-Press 
(Stop) button twice, it will stop the playback and go back to initial Track/Chapter.
Rapid Forward/Rapid Reverse Press 
FF & 
REW during play. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follow. DVD/VCD/CD/MP3:
Normal Playback 
2X 
4X 
6X 
8X
Skipping Track
Press 
/ 
on the remote handset or front panel during playback.
Press 
to skip to next track, and 
to back one track.
Note: For some VCD 2.0 discs
and 
buttons may be unavailable.
Slow Motion Play
Press slow button during playback. Each time the button is pressed, the slow mode changes according to the disc as follow. DVD:
Normal Playback
SF 2X 
SF 4X 
SF 8X 
SR 8X
SR 4X
SR 2X
VCD:
Normal Playback SF 1X SF 2X |
|
SF 3X | 10 |
Note: For VCD, in any slow mode, press ENTER button to return to normal playback.
Pause (still picture)
Pressing 
during playback will stop play temporary. Return to normal
playback, press 
once again.
Repeat
Press the REPEAT button to select repeat mode as follow.
DVD:
Press the REPEAT button to select repeat mode as follow.
CHAPTER REPEAT ON 
TITLE REPEAT ON
REPEAT OFF
VCD/CD:
Press the REPEAT button to select repeat mode as follow.
REPEAT OFF 
1.Continuously repeat at the current chapter/ track, when selected
2.Select
3.When the player finish playback the current disc last chapter/track, it will stop display the elapsed time. When selected REPEAT OFF mode
4.REPEAT feature does not support VCD2.0 (with PBC ON).
Aux input jack (4)
When the unit connect external A/V you can press the AUX on the remote controller to switch to the aux input mode.
Reset
Reset button is placed on the front panel and must be activated with a ball point pen or thin metal object. Reset button is to be activated for the following reasons:
•Initial installation of the unit when all wiring is completed.
•All the function buttons do not operate.
•Error symbol on the display.
Remote Sensor (IR)
Point the remote handset to the remote sensor. Receive the signal from remote handset.
Turning the player on/off
Press the 
(POWER) button on front of panel or press 
(POWER) button on remote control to turn the player on or off.
