11
REMOTE CONTROL
LOADING / EJECTING A DISC

Preparing the Remote Control

Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: one button cell lithium
battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About 30 degree in
each the direction of the front of the IR
mark.

Loading a Disc

When you have installed the unit and all
connections have completed, you can
load a disc as follows:
1. Turn the ignition on the accessory
position.
2. Press the POWER button on the front
panel.
3. Press (EJECT) button to eject the
disc tray. The disc door is on the side
of the unit.
4. Place the disc with printed side facing
up on the tray, and then close the disc
door.
5. The player will start playback
automatically.

Ejecting a Disc

Press (EJECT) button to eject the disc.
Note: When the disc cannot be ejected
by pressing (EJECT) button (when
the unit can’t work normally or has no
power), you can activate the button on
the side of the unit with a pointed object
to eject the disc compulsively.
Button for compulsively
ejecting the disc