INSTALLATION

Notes:

•Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

•Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

•Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

•If installation angle exceeds 30º from horizontal, the unit might not give its optimum performance.

30º

•Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from “Front” (conventional DIN Front- mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis).

For details, refer to the following illustrated installation methods.

TAKE OUT SCREW BEFORE INSTALLATION

Before install the unit, please remove the two screws.

Take out screw before installation

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard having an opening as show below:

53 mm

182 mm

Installing the unit

Be sure you test all connections first, and then follow these steps to install the unit.

1.Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.

2.Disconnect the wire harness and the antenna.

3.Press the release button on the front panel and remove the control panel (see the steps of “to detach front panel”).

4.Lift the top of the outer trim ring then pull it out to remove it.

5.The two supplied keys release tabs inside the unit's sleeve so you can remove it. Insert the keys as far as they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit.

3

Page 2 Page 4
Page 3
Image 3
PYLE Audio PLMRKT12 owner manual Take OUT Screw Before Installation, Din Front/Rear-Mount, Installation Opening
Page 2 Page 4

PLMRKT12 specifications

The PYLE Audio PLMRKT12 is a versatile and high-quality marine speaker system designed to enhance your audio experience on the water or any outdoor environment. With its impressive features and innovative technologies, it stands as a reliable choice for music enthusiasts who prioritize durability and sound performance.

One of the standout features of the PLMRKT12 is its robust construction. Engineered with a water-resistant design, these speakers can withstand the harsh elements of marine environments, making them ideal for boats, yachts, and other outdoor activities. The speakers are equipped with a weatherproof enclosure that protects against splashes and moisture, ensuring long-lasting performance.

The PLMRKT12 offers a powerful audio experience thanks to its enhanced sound capabilities. With a peak power output of 600 watts, these 12-inch speakers deliver a rich and dynamic sound quality that can easily fill larger outdoor spaces. The speakers utilize a 2-way design that incorporates a polypropylene cone that provides deep bass and a balanced midrange, while a mylar dome tweeter helps reproduce higher frequencies with clarity.

Another notable feature is the mounting versatility provided by the included heavy-duty brackets. This allows users to securely install the speakers on various surfaces, including boats, ATVs, and outdoor decks. The adjustable design of the brackets ensures a perfect angle for sound distribution, enabling listeners to enjoy their favorite tunes from any position.

For those who seek connectivity options, the PYLE Audio PLMRKT12 comes equipped with a built-in Bluetooth receiver. This allows users to wirelessly connect their smartphones, tablets, or other Bluetooth-enabled devices for easy music streaming. Additionally, the system includes auxiliary inputs, enabling users to connect non-Bluetooth devices effortlessly.

The durable and stylish aesthetic of the PLMRKT12 enhances any outdoor setup. The sleek design is complemented by a sophisticated finish that can blend seamlessly with various marine or outdoor architectures. The LED lighting feature further adds a modern touch, creating an illuminated ambiance during evening gatherings.

In summary, the PYLE Audio PLMRKT12 is an outstanding choice for anyone seeking quality sound performance in a marine or outdoor setting. With its resilient construction, impressive power output, versatile mounting options, Bluetooth connectivity, and stylish design, it stands as a top-tier choice for enhancing outdoor audio experiences. Whether cruising on the water or hosting a backyard party, the PLMRKT12 delivers exceptional sound, making it a valuable addition to any audio setup.
Top Page Image Contents