PYLE Audio PLTK300 owner manual Providing A/V audio to your car radio, Specifications

Selecting channels and adjusting the sound			Installation and Electrical Connections
	POWER	MUTE
Use the CH+ and CH- buttons for selecting channels.			1.Find a suitable location for the tuner unit and mount it securely
Use the VOL+ and VOL- buttons to increase or decrease audio volume.	AVC	AUTO
	CH+
You will see a Volume Bar on screen indicating relative volume level.	MENU		in place. Be sure to place it in an area away from moisture and
	VOL-	VOL+
Pressing the MUTE button will disable the audio output. To cancel the	CH-		dirt, and where incoming cables will not be walked on or pulled
muting function, press MUTE again.			accidentally.
	REMOTE
	TV TUNER
Please note :VOL+, VOL- and MUTE buttons are of no effect in AV			2. Make all required audio, video and power connections to the
mode.
Providing A/V audio to your car radio			appropriate connectors on the tuner as indicated in the drawing
			below to suit you system installation. Install the infrared remote
This system offers you two ways of playing the A/V audio through your car radio
			eye in a located you know will be available in line-of-sight with
system. If your radio has AUX line-level inputs, you can attach the A/V audio output
			the remote control use location.
connectors to these inputs with RCA-RCA interconnect cables.
If your car radio lacks these AUX line level input, your other option is to use the tuner			Please note that the drawing below describes connections
audio transmission ability to broadcast the audio signal within your car directly to
			for all system possibilities and your particular system may
the radio FM modulation.
			vary from this.
8			5

Changing the battery in the remote						Precautions
1.The remote battery is held in a small drawer on one edge						Please read this manual completely and carefully prior to attempting to install the equipment.
of the remote. To open this drawer, press and hold the small						1.Do not operate this equipment while-safe driving should always be your highest priority.
button on the edge of this drawer(as show below) and slide						2.Do not install these components in an area which are susceptible to rain, moisture, direct sunlight, extreme
the drawer out
						heat or cold, excessive dust, dirt or humidity.
2. Insert a new battery and push the drawer back fully into the						3.Immediately unplug the power cord and send the monitor to your local dealer or service center as soon as
remote.				Battery	+	possible:
						a) If there is smoke or any peculiar odor present during use.
Specifications				Release button		b) If there is damage to any of the component casings.
						4.To avoid damage and risk of electronic shock, do not permit this equipment to become damp or wet from
	Signal System	N T S C				water or drinks. If this dose occur, immediately unplug the power cord and send the unit to your local dealer
	Audio/Video Inputs	A u d i o R / L	2 , V i d e o	2		or service center as soon as possible.
	Audio/Video Outputs	A u d i o R / L	1 , V i d e o	1
						5.Do not attempt to repair, open or diassemble any of the components. Dangerous high voltages are present
	FM transmitter	4 C h a n n e l F M ( 8 7 . 7 / 8 7 . 9 / 8 8 . 1 / 8 8 . 3 M H z )
						which may result in electric shock.
	TV Channel	C h a n n e l s 2 - 8 1
	Tuner Box, Overall Dimensions	L ) 7 ( W ) 4 . 5 ( H ) 1 . 1 i n c h				6.Use only a power source with 12 Volts DC (negative ground).
						7.Do not place objects on or suspend objects from the power cord, as this may damage the cord.
	Tuner Box, Weight	0 . 4 7 K g
						8.Do not twist or place the power cord near any source of heat in the vehicle.
						9.Do not attempt to repair a damaged, broken or faulty power cord. Replace it with a new one immediately.

10

3