OPERATION
appears on the display, you can press “1 “button then press “6” button to select 16 channel.
•Mute
Press MUTE button on remote control to cut down sound output.
Press it again to resume the previous volume mode.
•Screen display
Press TITLE (DSP) button on remote control to display the current status such as TVch. If you don’t operate over five seconds, the information on the screen will disappear.
•Menu Control operation in TV mode
Press SEL button on remote control to enter sound menu, then you can press CH 
/ 
buttons to select the item upward or downward. Then press VOL+/- buttons to adjust the selected item. The corresponding value will show on the display.
VOLUME 40
BASS-2
TREBLE-2
BALANCE
FADERR-F
LOUDON
EQPOP
AV OPERATION
•Switching to AV mode
On the back of the unit, there is a pair of AUDIO/VIDEO INPUT jacks. When you connect an audio/video system through these jacks, press MODE button on remote control to select AV mode.
•Menu Control operation in AV mode Press SEL button on remote control to enter sound menu, then you can press CH 
/ 
buttons to select the item upward or downward. Then press VOL+/- buttons to adjust the selected item. The corresponding value will show on the display.
VOLUME 40
BASS-2
TREBLE-2
BALANCE
FADERR-F
LOUDON
EQPOP
•Mute
Press MUTE button on remote control to cut down sound output. Press it again to resume the previous volume mode.
RGB OPERATION
•Switching to RGB mode
When you connect the RGB terminals on the back of the DVD unit to the corresponding RGB system, then press MODE button on remote control to select RGB mode, the RGB signal will appear on the screen.
Note: When you press MODE button to select RGB mode and there hasn’t any RGB signal input, then there is nothing to display on the screen.
23
