PYLE Audio PM725 manual Code Learning, cont, Learning Commands

Code Learning, cont.

Learning Commands

1.Press and hold the Code Search button until the red indicator stays on. Release the Code Search button.

2.Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.). The indicator lights blinks off once.

3.Press the Learn button.

4.Press the button on the Learning Remote that you want to teach, e.g. Power.

5.Point both remotes at each other (see tips on page 11). Press and hold the Original Remote button that you want to learn, e.g. Power, until the indicator light turns off. If there is a problem with learning,

the indicator light blinks for three seconds but the remote remains in the Learning mode. If this happens, repeat from Step 4.

6..Repeat Steps 4 and 5 for other buttons you want to learn.

7.Press and release the Code Search button when all desired original remote commands are learned. Code Learning is now complete.

Note :- No functions may be stored under the Code Search button, any mode button, AUX button, or the Learn button.

5.

Approx. 1 inch apart

	VCR	DVD	CBL
2.	TV			SAT
	AUX			CD
		CHAN+
	CODE			PREV
	SEARCH		VOL	CHAN
1.		MUTE		4.
			+
				REPEAT
		CHAN
	SLEEP			SUBTITLE
		POWER		CC
	PIP	TOGGLE	LEARN	3.

14

Code Learning, cont.

To Clear all Learned Commands under a mode

1.Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.

2.Press and release the button for the mode you want to clear (TV, VCR, etc.). The indicator blinks off.

3.Press and release the Learn button TWICE. The indicator blinks off.

4.Press and release Code Search. The indicator blinks off.

All learned Commands under that mode are now cleared.

VCR	DVD CBL
TV		SAT
2.
AUX		CD
	CHAN+
CODE		PREV
SEARCH		CHAN
	MUTE	VOL
		+
1, 4.		REPEAT
	CHAN
SLEEP		SUBTITLE

POWER CC

3.

PIP TOGGLE LEARN

Master Clear - To Clear all Learned Commands, i.e. return to factory defaults

1.Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.

2.Press and release the Learn button TWICE. The indicator blinks off.

3.Press and release Code Search. The indicator blinks off.

All Learned commands in the remote are now cleared.

	VCR	DVD CBL
	TV		SAT
1, 3.	AUX		CD
		CHAN+
	CODE		PREV
	SEARCH		CHAN
		MUTE	VOL
			+
			REPEAT
		CHAN
	SLEEP		SUBTITLE

POWER CC

2.

PIP TOGGLE LEARN

15