Delay Effect Pedal, Instructions, SP£QE!CAIlON§

DELAY EFFECT PEDAL

PPDLD3

INSTRUCTIONS

SP£QE!CAIlON§.

PPDLD3: Delay

Input Impedance: 1M Q

Output Impedance: Over 10k Q

Power Supply: 9 V DC:

Dry Battery9 V type ( 6F22/9V) ,

AC Adaptor.

Current Draw: 12mA (9V DC )

OP£RATION

I. D.TIME Knob

This is the delay times control . times is increased when control is turned clockwise and decreased when turned counterclockwise.

2.FEEDBACK knob

This controls the amount of feedback. delay effect will increase by turning it clockwise and decrease by turning it counterclockwise.

3.D.LEVEL knob

Controls the level of delay. Effect is increased by turning clockwise and decreased by turning it counterclockwise.

4.Output Jack

The outputjacks are used to connect the unit to amplifiers or other devices.

5.AC Adaptor Jack

Accepts connection ofan AC Adaptor. By using an AC Adaptor, you can play without being concerned about how much battery power you have left .

6.Input Jack

Thisjack accepts input signals (coming from a guitar , some other electric or electronic musical instrument, or another effects unit)

7.Check Indicator

This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator.The indicator lights when an effect is ON. Ifthis indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately.

8.Pedal Switch

This Switch turnsthe effects ON/OFF.

9.Battery Housing

9 V Battery is be placing inside it.

PYLE Audio manual Delay Effect Pedal, Instructions, SP£QE!CAIlON§, PPDLD3 Delay, Op£Ration

Models: PPDLD3