If the projector is the new one 
please read projector install chapter
placed the projector
connect the powerwire and the signelwire
the operation as follow:
Open operation
1.Before use the remoter .
Put in two 7 size battery in it
2. Open the power switch on the backboard
the power light begin to flash 
press the power key on the remote control or panel
the indicator light turn light 
Power
After 2 second
the projector lamp begin work
began appear unclear white light on the screen
after 2 minute,the projector begin work 
5. | For | the new projector. When the frist time to use maybe will appear image | ||
unclear | or | trapezoid distortion please read image adjustment chapter | ||
6. | After | the image is clear then you can watch program | during watching | |
| you also can setup the system parameter please read | menu setting chapter | ||
Close operation
1.During use the projector
press power key
can let the projector switch to stay situation 
2.After inter into stay situation
the projector under auto protect
auto release hot
the indicator light is flase situation
but here
the projector is under auto protect situation
not accept any order 
if need to startup again 
must wait for finished the release hot .
DVD menu operation setting
Language setup:
When you choose the language setup ,the screen will display as following
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE set up the menu words
AUDIO langset up the disc language
SUBTITLE LANG set up the disc display words
MENU LANG set up the disc menu display words
Note : B,C,D is relation with the disc that you play ,if can not
set .your disc no this function
16
