OPERATION:
1 INSERT AC POWER PLUG INTO A 110V VOLT AC OUTLET.
2CONNECT THE POWER CORD OF YOUR EQUIPMENT
3 TURN SWITCH TO “ON”, RED LIGHT IN SWITCH WILL ILLUMINATE.
4THE INPUT POWER IS PROTECTED BY THE FUSE WHICH IS LOCATED AT THE REAR OF THE UNIT AND CAN BE REPLACED BY UNSCREWING THE FUSE HOLDER IF THE FUSE IS BURNT OUT. DO NOT USE A FUSE LARGER THAN … AMPS USE OF HEAVIER FUSE MAY RESULT IN DAMAGING TO THIS UNIT (… SEE NOTE)
5THIS UNIT HAS ELECTRONIC OVERLOAD PROTECTION WITH INSTANT AUTOMATIC RESET FUNCTION. IF OUTPUT IS OVERLOADED. THE OUTPUT POWER WILL AUTOMATICALLY SHUT OFF. RELEASE POWER CORD OF YOUR EQUIPMENT
FROM THE OUTPUT TERMINALS AND CHECK THE ACTUAL POWER RATING OF YOUR EQUIPMENT THIS UNIT WILL AUTOMATICALLY RESET INSTANTLY.
6OVER TEMPERATURE PROTECTION CIRCUITRY IS USED IN PSL32X/42X/ 72X/82X TO PREVENT OVER HEAT DAMAGE UNIT WILL BE SHUT DOWN MINUTES AFTER 15 MINUTES( MIN. ) AT 100% RATED LOAD.
25 MINUTES( MIN. ) AT 80% RATED LOAD.
…NOTE PSL32X: 1.5 AMP PSL42X: 1.0 AMP PSL72X : 1.5 AMP PSL82X: 1.5 AMP
CAUTIONS:
1.DO NOT USE WITH EQUIPMENT REQUIRING MORE THAN RATING AMPS
2.DO NOT USE OUTDOORS DO NOT EXPOSE UNIT TO RAIN, MOISTURE, WATER OR ANY OTHER LIQUIDS.
3.DO NOT REMOVE COVER IN ANY CASE. RETURN TO DEALER FOR REPAIR IF DAMAGED.
4.THIS UNIT HAS A SPECIAL
“DANGER”
HIGH VOLTAGE
REFER TO QUALIFIED TECHNICIAN FOR SERVICE.
5(*8/$7(''& 32 (5 6833/<
02'(/36/;;;;
INSTRUCTION MANUAL
www.pyleaudio.com | |
|