PYLE Audio PSW101CM manual Knob, Brick, Concrete and Stone wall, Hanging display

Brick, Concrete and Stone wall:

Using the wall mount as template to mark 6 holes location on the wall. Three holes are located at the top row of the slots and three more are located at the bottom row. The outer holes must be fall to the left and right of the two holes in the middle of the

mount. Please make sure these holes are level and at least 6” between any two lines. Pre-drill these holes with a 10mm drill bit to at least 80mm deep hole. Insert wall

anchors(P) into each of these holes. Attach the wall mount to the wall using 6 long bolts(O) and washers(Q).

Tilt Flat Panel TV Bracket

	1
	Q	O
Fig 2b	Fig 2c

Multifunctional double deck wall mount

INSTALLATION GUIDE

Item No.:PSW101CM

Step 3: Hanging display

Firstly lift the bracket mounted display over the wall mount. And then hook the brackets over the top of the wall mount. Rotate the display let the bottom of the brackets hook over the bottom of wall mount, as shown in Fig.3a. Then put safe bolts into the bottom of the brackets and lock it, as shown in Fig.3b.

Warning: Some TV require two people to lift, as we are not responsible for any personal injur y or product damage due to mishandling.

Knob

Thank you for choosing our products Manufacturer: Logitek standard electronics cable manufacture co.,ltd.

2,3

1

4

Add: Science and Technology Zone, Jiangshan Town, Yinzhou District, Ningbo, China. Tel:86-574-88098888(88070226)

Fax:86-574-88098788 Email:sales1@china-logitek.com

Sales2@china-logitek.com Web: china-logitek.enalibaba.com www.globalsources.com/logitek.co

Easy installing: Just hang up the display

Safety: locking by spinning bolt on the bottom

Max load capacity:75kg/165lbs

TV size range: 36"~55"

Fig 3a Fig 3b

www.china-logitek.com p.c.:315191

Adjustable angle: -5 ～15 ,

-8-

IMPORTANT: If don’t understand about right install ways, please consult to normal installing specialist.