PYLE Audio PSW117ET1 manual Eyelevel, Attach mount to wall, Attach bracket to TV

Step 2: Attach mount to wall

First, determine the height of stand

The best height of stand is parallel to eyelevel of a person who sitting on a couch. Normally, the horizontal distance of eyelevel is about 4’ from ground level.

The following two conditions are for determining the perfect height of stand:

1) the distance between wall and couch(Fig 2a).

2) the distance of eyelevel from ground level plus the distance measured from eyelevel of a person sitting on couch with viewing angle of 15°(Fig 2a).

For example:

1) the distance of ‘a’ is 5’-7’, the distance of ‘b’ is about 1’

2) the distance of ‘a’ is 8’-13’, the distance of ‘b’ is about 3’

3) the distance of ‘a’ is 14’-17’, the distance of ‘b’ is about 4’

The perfect height of stand centre will be anywhere within b, where you feel comfortable for viewing.

15 degree	b
viewing angle

We are not responsible for any personal injury or product damage
due to mishandling, incorrect mounting, incorrect assembly or	WARNING
incorrect use of this product.

Note: The supplied wall mounting hardware is not for use on steel stud walls or cold cinder block walls. If you are uncertain about the nature of your wall, please consult a qualified contractor. If the hardware you required is not included please contact your local hardware store.

Caution : This Product LCD /Plasma Wall Mount Bracket is intended for use only

with the maximum weights indicated .See apparatus instructions .Use with products heavier than the maximum weights indicated may result in instability causing possible injury .

Step 1: Attach bracket to TV

If your display hole’s vertical distance> 400mm, you need to use the lengthen bracket on both brackets(2,3).Lengthen bracket(4,5) installation:

According your display hole's distance to choose the bracket hole's.

Install the Lengthen bracket(4,5) directly to the both brackets(2,3) by using M6x50mm(9) bolts M6 washers(8) and M6 nuts(7), As shown in Fig 1a.

eyelevel

a

Fig 2a

UP

Fig 1b

2

4

		3
7	8	9
UP
	5
Fig	1a

Check your TV manual to confirm the diameter of bolt to be used or choose an

appropriate bolt according to size, height and position of the holes on your TV. See pages 4-5 of these instructions for examples.

For correct installing, make sure that hook of ever y bracket must facing down. Use selected bolts, spacers and washers for installing bracket at the back of display.

Adjust two brackets to equal heights and level. Once aligned, tightly secure the bolts. Note: the "UP" side on the top. As shown in Fig.1b.

-6- -3-