Following examples shows how to use bolts, spacers and square washers.
1.Some displays have vertical backs. No spacer is required. Install the bracket directly to the back of display by using bolts and square washers provided. As shown in Fig.1a.
M4 Fig bit | M5 Fig bit |
| G |
|
| A,B |
|
3 | 2 |
|
| C | |
| G |
M6 Fig bit
3 | G | D |
|
|
2. Some displays have cur ved backs with recessed mounting lands(Fig.a). It will require the use of spacer. For this display, install a spacer(K) between display and the bracket. As shown in Fig 1b.
M5 Fig bit
K
E
3G
Fig 1b
Fig a
M6 Fig bit
K
F
3G
Fig 1a
|
|
|
|
|
|
| |||
