Part 3-Mounting the flat panel screen
2,3
Hook the top of brackets(2,3) onto the top flange of wall plate(1). Then swing the screen down.
NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment.
Use the Locking bar(4) to prevent the TV from being removed or
accidentally knocked off of the wall plate.When the locking bar half
insertes into the wall plate , you can use the rotating rod(5) to make it fully inserted.
45
Part 1a-Wood Stud Mounting
Use wall plate(1) as a template, make sure it is level, and mark four mounting holes along the center lines of the wood studs. Drill four 3/16” (5mm)dia. holes 2” (50mm) deep. Level wall plate(1) and attach to wall with four long bolts(G) and four washers(I). Tighten screws firmly. Do not overtighten.
Stud finder
Wood stud
2”(50mm) | I |
| |
| G |
Φ3/16”(5mm) |
|
|
|
|
|
|
| ||||
