PYLE Audio PT655E Panel Information, 1. ON/STANDBY SWITCH, Spectrum Display, Equalizer Setting

PANEL INFORMATION

1 2 3

11 10 9 8 7 6 5 4

1. ON/STANDBY SWITCH

Depress button to switch “ON” the unit. Press release to switch “OFF” unit into “STANDBY MODE”. If the unit is left unattended for long periods, remove the A/C plug from the power socket.

2. SPECTRUM DISPLAY

This displays the sound level different frequency bands (Because the level indicator is connected to the input side, the indication does not change when the VOLUME control is turned.

3. EQUALIZER SETTING

These settings allow the levels approximate to the frequencies indicated above the controls to be continuously controlled from +12 dB to –12 dB for the left and right channels separately.

Press key (◄) to shift the lower frequency band and key (►) to shift the higher frequency band that you want to adjust. When arrived to the pre-decided band, relative indicator will flash.

Press level UP (▲) control key or level down control key (▼) to the level that you wish to create, then press MEMORY key and select (A-E) to program. And 5 different sets of personally created sound fields can be stored.

4. EQ MODE SWITCH (FINE/ALT)

Press the EQ mode switch (4), the word ALT is displayed and the alternating band level can be adjusted. And press it once again, the word FINE is displayed & each succeeding sound level can be adjusted.

5. EQUALIZER FLAT BUTTON

This button is used to turn the equalizer flat.

This equalizer also has five pre-memorized 5 different level curves of sound mode including.

6/7/8/9. CLASSIC/ DISCO / JAZZ / ROCK SWITCH

If you are listening to the above 4 kinds of music, press the relative modes of switch. The best sound effect will be heard.

10. DISPLAY/MEMORY MODE SWITCH

This EQ spectrum has 5 display modes. When pressing DISPLAY/MEMORY switch once, one of the 5 display modes will be appeared. And press once again, another one display mode appeared and similarly.

When you have set the sound level curve of the equalizer personally, pressing the DISPLAY/MEMORY switch, “MEMO” will be lit up in the display. And press A-E to memorize it in A-E preset knobs.

11. USER PRESET SWITCH

You can press A-E to take your preset sound level curves.