PYLE Audio PTA3 manual Trouble Shooting

Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode.

TROUBLE SHOOTING

No power	The fuse might be blown.	Check the	amplifier's fuse
		and replace it if necessary.
No sound	Sound source or speakers	Check all connections.
	not connected properly.
	MUSIC volume control set	Adjust the volume control
	to minimum.	to desired setting.
	The speaker's wire might be	Make sure	all	connected
	the wrong impedance.	speakers have		the same
		impedance rating.
	The amplifier might has	Turn the amplifier off and
	shut down.	let it cool. Make sure the
		amplifier	is	properly
		ventilated, and then turn it
		back on.
Feedback	Microphone or speakers are	Reposition the microphones
	too close together.	and speakers.

4