PYLE Audio PVNTT5U manual Preparation for USE

PREPARATION FOR USE

UNPACKING AND SET UP

Carefully remove the unit from the display carton and remove all packing material from the unit.

Unwind the AC power plug and extend it to its full length.

Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields.

Connect the plug to your AC outlet.

Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in the direction of the arrow. Discard the stylus cover.

Remove the twist-tie that was used to secure the tone arm during shipment. Release the tone arm lock lever.

Connect the plug to your AC outlet.

TONE ARM LOCK LEVER

STYLUS COVER

POWER SOURCE

This product is designed to operate on 120V 60Hz AC only. Attempting to operate this system from any other power source may cause damage to the system, and such damage is not covered by your warranty.

NOTE: You will note that this system is equipped with domestic standard AC power 2-pin plug. If this plug does not fit into your

existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fitinto your outlet, you probably have an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician.

AC Outlet AC Plug

2