![](/images/new-backgrounds/1029535/295355x1.webp)
ENGLISH
www.pioneerelectronics.com
TERMINOLOGY AND CONTROLS
➊STATUS INDICATOR – The LED found on the front panel will illuminate when the subwoofer is functioning. If the unit is in Auto mode and is not receiving a signal, the light will remain off.
➋VOLUME – This knob can be adjusted to control the level of output from your subwoofer. The level chosen should allow the subwoofer to blend its output with that of the rest of your audio system.
➌FREQ – This control allows for the adjustment of the
➍PHASE – This switch allows for the adjustment of the phase of the subwoofer, in relation to the speakers used in your system, from 0 to 180 degrees.
➎POWER – This switch can be set to either On, Stand By or Auto. If the switch is in the Stand By position, the subwoofer will remain off. If the switch is in the On position, it will constantly remain on. If the switch is set to the AUTO position, when a signal is present the subwoofer will turn on and will automatically turn off several minutes after a signal is no longer present.
➏LINE IN – These inputs are an RCA type LFE/stereo/mono input. If you are connecting your subwoofer to a
➐HI LEVEL IN – The Speaker Level inputs are designed to be used on receivers or amplifiers that do not incorporate any RCA type subwoofer outputs. If your receiver is equipped with an RCA type subwoofer output, these speaker level inputs should not be utilized.
3