LOCATION AND FUNCTION OF CONTROLS
1.LOC BUTTON
Press it for distance reception when you are located at the stronger signal location. Depress it for weak signal.
2.OPEN BUTTON
Press it to flip down the front panel then insert disc into disc slot or press EJECT button to eject out disc or take away the front panel.
3.4.SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTONS Press SEL button to change the mode in the sequence of
BAS 
TRE 
BAL
FAD 
VOL
1)The volume level can be adjusted at any time by pressing the audio level+ or Button as select mode has been initially defaulted at volume mode.
2)The volume level is also obtained by stepping through the SEL button until the function VOL is displayed and then press + or - button to adjust the sound level.
3)Press and hold the + or - button to adjust the sound level.
BASS CONTROL
1)Press the SEL button to select the bass mode until BAS appears on the display.
2)Press + or - to adjust the bass effect.
TREBLE CONTROL
1)Press the SEL button to select the treble mode until TRE appears on the display.
2)Press + or - to adjust the treble effect.
BALANCE CONTROL
1) Press the SEL button to select the balance mode until BAL appears on the display.
SPECIFICATION
GENERAL
Power requirement | DC 13.8V. |
Current consumption | 7A MAX. |
POWER OUTPUT | 4 X 40W. |
FM SECTION |
|
Frequency range | 87.5MHz |
Frequency range | 87.5MHz |
Usable sensitivity | 3uV. |
I.F Frequency | 10.7MHz. |
AM SECTION |
|
Frequency range | 522KHz - 1620KHz(EUROPE) |
Frequency range | 530KHz - 1710KHz(USA) |
I.F Frequency | 450KHz |
Usable Sensitivity | 29dB |
LINE - OUT [OPTION] |
|
Output | 300mV @ FM 10% THD POWER. |
CD PLAYER |
|
System | compact disc audio system. |
Usable disc | compact disc/mp3 disc |
| No of quantization bits 1bit. |
Signal format | sampling frequency 44.1KHz. |
Frequency characteristics | |
| |
Signal to noise radio | 70dB [1KHz] |
Number of channels | 2 STEREO. |
Chassis dimensions | 178[W] X 50[H] X 150[D]. |
3 | 8 |
