Section C
Options and Accessories
Insulated Drive Roll Kits
Used to prevent preheating of the wire which may soften it and clog the liner. This picking up of current at the drive rolls rather than at the contact tip is usually not a problem unless using too large of a contact tip or excessively oxidized aluminum wire.
Insulated Groove Drive Roll Kit |
|
For .030" (0.8 mm) dia. aluminum wire. Includes insulated drive roll and idler roll assy.
Insulated Groove Drive Roll Kit |
|
For .035" (0.9 mm) dia. aluminum wire. Includes insulated drive roll | |
and idler roll assy. |
|
Insulated Groove Drive Roll Kit |
|
For .040" (1.0 mm) dia. aluminum wire. Includes insulated drive roll | |
and idler roll assy. |
|
Insulated Groove Drive Roll Kit |
|
For 3/64" (1.2 mm) dia. aluminum wire. Includes insulated drive roll | |
and idler roll assy. |
|
Insulated Groove Drive Roll Kit | |
For .062" (1.6 mm) dia. aluminum wire. Includes insulated drive roll | |
and idler roll assy. |
|
Replacement Kits
Handle Kit Gun |
|
Left and right handles, screws and drive roll door, as a replacement for all Millermatic Compatible™ Python® guns.
Trigger Kit |
|
Trigger adjustment kit includes a spring and sensitivity adjustment screw | |
replacement for all Millermatic Compatible™ Python® guns. |
|
Micro Switch Kit |
|
Replacement micro switch assembly for all Millermatic Compatible™ Python® guns.
Potentiometer Kit |
|
Replacement potentiometer assembly for all Millermatic Compatible™ | |
Python® guns. |
|
Barrel Insulator Kit | |
Replacement barrel insulator and taper lock nut. |
|
Conduits
Flat spiral steel conduit for steel & cored wire. | |
15 ft./4.5m | |
25 ft./7.6m | |
35 ft/10.7m | |
50 ft./15.2m |
Snake Skins
A Snake Skin protective cover is standard on the Millermatic Compatible™
Python®. See below for replacement part numbers. | |
15 ft./4.5m | |
25 ft./7.6m | |
35 ft/10.7m | |
50 ft./15.2m |
Liquid Cooled Millermatic Compatible™ Python® Owner's Manual - Page